Scholl Concepts Shock 2 Cut Extreme Cutting Compound
Scholl Concepts Shock 2 Cut Extreme Cutting Compound
Scholl Concepts Shock 2 Cut Extreme Cutting Compound
Scholl Concepts Shock 2 Cut Extreme Cutting Compound
Scholl Concepts Shock 2 Cut Extreme Cutting Compound
Scholl Concepts Shock 2 Cut Extreme Cutting Compound

Scholl Concepts Shock 2 Cut Extreme Cutting Compound

Išparduota
34,00 €

 

Scholl Concepts Shock 2 Cut

Scholl Concepts Shock 2 Cut is a 1-step, high performance, extreme cutting compound for use on new and weathered paintwork.

Thanks to the outstanding and extreme cut, as well as the superior high-gloss features, it knocks-out even the deepest and most severe paint imperfections in seconds.

Tip: Measure your paint with a paint depth gauge before carrying out intensive cutting. You need to ensure you have enough clear coat to work with before you 'chase' deeper paint imperfections.

Application:

  • Shock 2 Cut can be used on rotary and dual action machine polishers
  • For best results, use with the Scholl Concepts White Sandwich and/or White Spider Pad, Navy Blue Spider Pad and Orange Ecofix Pad

Specifications:

  • Extra Heavy Cut
  • High Gloss
  • Removes 1200 - 1500 grit sanding marks
  • Usable from 1500 - 2000 RPM on Rotary machines
  • Usable from 2000 - 10000 OPM on DA machines
  • Made in Germany
  • 500 Gram (16 oz)
  • Color: White
  • Cut: 6/6
  • Gloss: 4/6

Application with Dual Action:

  1. After spreading across 2 sq. ft. +/- area on low speed, work at speed 4-5 applying moderate pressure through the first half of the cycle.
  2. Next use progressively lighter pressure until finished down.  Recommended machine speed and pressure varies based on machine type and paint.
  3. Once worked to a tiny film, buff off the residue using microfiber towel.
  4. Clean pad with pad cleaning brush
  5. Use only 3-5 pea size drops for each additional section (depending on pad size), repeating steps 1-4 after each section.

Application by Rotary:

  1. Spread product across work section with machine. 
  2. After spreading, work at medium rpm or as required based on paint type.
  3. Halfway through cycle, slow speed progressively lower and continue until polish has broken down.
  4. Once completed, buff off the residue using microfiber towel.
  5. Clean pad with pad cleaning brush
  6. Use only 2-4 pea size drops for each additional section (depending on pad size), repeating steps 2-5 after each section.
Grubumo tipas
Didžiausio aštrumo (Heavy)
Tūris
500 ml.
SC_S2C_500

Mūsų interneto svetainėje yra naudojami slapukai. Jie padeda užtikrinti tinkamą tinklapio veikimą bei jo tobulinimą, todėl būtinieji slapukai (techniniai, funkciniai bei analitiniai) yra įdiegiami automatiškai. Siekiant individualizuoti jūsų naršymo patirtį bei pateikti pasiūlymus, kurie būtų aktualūs būtent Jums tinklapyje taip pat naudojami tiksliniai slapukai. Paspaudę „sutinku“ Jūs sutinkate su tikslinių slapukų įdiegimu ir naudojimu.