- -10%
Artdeshine Ceramic Metal Oxide Coating
Antimony Tin Oxide (ATO) nanoparticles work as sunlight heat shields in the near infrared region (NIR) region of solar radiation. They are commonly used to protect acid sensitive materials and as protective coatings due to its optical transparency.
Based upon the polymeric composition similar to our Nano Graphene Coating, Ceramic Metal Oxide promises high mechanical strength and thermal stability with good optical, thermal and barrier properties.
The ATO assists in reducing chemical reactions of contaminants aggravated by heat or UV that can otherwise result in permanent etching, spotting and staining.
Key features:
- 5 YEARS BONDING DURABILITY
- RAPID WATER DISPERSION
- HYDROPHOBIC
- EASY CLEANING
- ANTI-FOULING
- SPREADS EASY
- ALL SURFACE USE
Product capabilities:
- ETCHING REDUCTION
- CORROSION RESISTANT
- CHEMICAL RESISTANT
- REDUCED THERMAL CONDUCTIVITY
- EXECELLENT UV RESISTANCE
- ENHANCED TENSILE STRENGTH
- ENHANCED FLEXIBILITY
- ENHANCED DURABILITY
- ABRASION RESISTANT
- REDUCED SURFACE FRICTION
Etching, water-spots and stains are caused by contaminants and harmful substances reacting with heat/UV. The ability of ATO to resist acids and repel heat/UV significantly reduces the damage done.
CMO's advanced polymer technology forms a flexible tensile yet tough coating that bonds extremely well and durable to wear and tear.
A smooth surface reduces friction, thus lowering the amount of force created by abrasive actions that can otherwise cause fine-lines and scratches. This results in significantly less damage caused during washing and drying.
Product finishing:
- BRIGHT GLOSS
- REFLECTIVE SHINE
- SLEEK & SMOOTH
- DARKENS MATTE SURFACES
- ENHANCES MATTE SHINE
- VIBRANT COLOURS
Technical information:
Surface suitability: gloss clear coats on automotive body, gloss or matte vinyl wraps, paint protection film (PPF) wraps, acrylic parts, gloss/matte plastic trims and fittings.
Bonding Durability (normal conditions): 5 years
350 washes, pH neutral
climate range -20°C to +35°C
Bonding Durability (extreme conditions): 5 years
180 washes, pH3>13
climate range -40°C to +40°C
Chemical Resistance: pH2 - pH14
Consumption: 2-3 ml/m² or 15 - 20 ml per mid-sized sedan
Water Repellence: contact angle 110-120°
Oil Repellence: contact angle 80-90°
Shelf Life: 2 years un-opened; 6 months after opening
Surface dry:
2 hours (tropical/humid) / 12 hours (temperate/dry) or 0.5 hours infared assisted 40 - 50°C
Full curing:
4 days (tropical/humid) / 7 days (temperate/dry)
Available sizes: 50 ml
You might also like